PipingOffice - Piping Calculators

Get this set of calculators for piping design.

Calculations are per ASME Piping Codes:
    B31.1 Power Piping
    B31.3 Process Piping
    B31.4 Pipeline ..Liquids...
    B31.5 Refrigeration Piping
     also Miscellaneous

---

1. Calculators per ASME B31.3 -2008, Process Piping:
   
   
   1. Pipe Allowable Pressures
      
      
   2. Pipe Required Thicknesses
      
      
   3. Branch Reinforcement (three files):
      
      1. One file has a table w/ up to 190 branches.
      2. Two other files allow design of individual branches and can check for overlapping reinforcement zones.
      
      
   4. Pipe Bending Required Thickness and Allowable Pressure
      
      
   5. Pipe Allowable Pressures, Chapter IX Hi-Pressure
      
      
   6. Mitered Elbow Required Thickness and Allowable Pressure
      
      
   7. Flexibility and Stress Intensification Factors
      
      
   8. Extruded Outlet Pipe Branch Reinforcement
      
      
   9. Line Blanks, Line Spacers, Spectacle Blinds (Fig-8's), and Restricting Orifices
      

2. Calculators per ASME B31.1a -2008, Power Piping:
   
   
   1. Pipe Allowable Pressures
      
      
   2. Pipe Required Thicknesses
      
      
   3. Branch Reinforcement (three files)
      1. One file has a table w/ up to 190 branches.
      2. Two other files allow design of individual branches and can check for overlapping reinforcement zones.
      
      
   4. Pipe Bending Required Thickness and Allowable Pressure
      
      
   5. Mitered Elbow Required Thickness and Allowable Pressure
      
      
   6. Flexibility and Stress Intensification Factors
      
      
   7. Steam Safety Valve Discharge Reactions
      
      

3. Calculators per ASME B31.5 -2006, Refrigeration Piping and Heat Transfer Components:
   
   
   1. Pipe Allowable Pressures
      
      
   2. Pipe Required Thicknesses
      
      
   3. Pipe Branch Reinforcement (two files)
      1. One file has a table w/ up to 190 branches.
      2. Another file allows design of individual branches and can check for overlapping reinforcement zones.
      
      
   4. Flexibility and Stress Intensification Factors
      
      

4. Miscellaneous:
   
   
   1. Support Span, Shoe Bearing, Pipe Weights (including refractory lined & plastic lined)
      
      
   2. Jacketed Pipe Weight and Data Calculations
      
      
   3. Jacketed Pipe Theoretical Column Buckling
      
      
   4. Theoretical External Collapsing Pressure (not per ASME)
      
      
   5. Dimensional and Material Properties of Pipe
      
      
   6. 3-D Offset and Triangle Dimension Calcs
      
      
   7. Expansion Joint Data Sheet
      
      
   8. Spring Hanger Data Sheet
      
      
   9. Pipe Bend Dimensions (Angle, Offset, and Special)
      
      
   10. Dimension Calculator, Metric & US Customary (mm, ft-inch-fraction, and decimal)
       
       
   11. Linear Interpolation - Example returns stress value after choice of material and temperature.
       

5. Calculators per ASME B31.4 -2006, Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids:
   
   
   1. Pipe Required Thicknesses
      
      
   2. Pipe Allowable Pressures
      
      
   3. Branch Reinforcement (for Internal Pressures. Calculates 2 branches side-by-side, and reinforcement zones may overlap.)
      
      
   4. Extruded Outlet Pipe Branch Reinforcement

6. Data Sets Used With Calculations:
   
   
   1. ASME B36.10M Welded and Seamless Wrought Steel Pipe (Dimensions, etc.)
      
      
   2. ASME B36.19M Stainless Steel Pipe (Dimensions, etc.)
      
      
   3. ASME B16.5 Pipe Flanges and Flanged Fittings
      
      
   4. ASME B16.48 Steel Line Blanks
      
      
   5. Piping Materials

---

Recent updates in PipingOffice - Piping Calculators


PipingOffice
   Ben A. Nottingham
   509 Kilkenny Road
   Kingsport, TN  37664-4465
   USA